Skip to content

Electric heated floors for any wear surface

ThermaRay heating cable goes on top of the subfloor or an existing slab and under any flooring. Cold surfaces become a radiantly warmed floor.

Where it goes
Above the subfloor or slab embedded in thin set or a self-leveling medium
Best for
Bathrooms, kitchens or any space with hard surface flooring
Role
Primary, Supplemental or Luxury Heat
Where floor warming goes. Choose another system to compare.

The lowest-profile
floor heat there is.

Floor warming turns cold surfaces into an even, gentle warmth. Great for new construction and remodeling projects. it’s easy to install, safe and healthy.

It suits the rooms where cold floors bother people most: bathrooms, kitchens, entryways and foyers. It can also cover an entire space.

“The electric radiant floor heating in the house is now comfortable, constant, clean. Every room has its own thermostat.”

Maggie J., Grand Marais, Minnesota. Floor warming poured over an old 1970 slab that had no real heating system.

Read the Full Story

Finished tile floor on Lake Superior
The finished floor in a Grand Marais home, with floor warming under the tile.

What you get

  • Goes under nearly every floor covering
  • Lowest profile in the industry
  • Spools combine to cover larger spaces
  • Even, gentle warmth with no drafts
  • Silent, with no maintenance
  • Invisible, with controls that can be invisible too
  • Qualifies for LEED points
  • A 45+ year track record with no failed systems

How a floor warming cable goes in.

Cable spools come in a range of lengths and wattages to match the area you want to warm. The cable is spaced evenly across the floor, and the leads run back to the thermostat or a junction box.

Spacing strips are available, but an uncoupling membrane is recommended. A floor sensor goes between the cables, then self-leveling concrete or thin-set covers everything before the finished floor goes down.

Floor warming cable laid out across the living room floor of the Grand Marais home
The cable laid out across the floor, before the self-leveler went down.
Self-leveling compound being poured over ThermaRay floor warming cable in Grand Marais, Minnesota
Self-leveler going over the cable in a Grand Marais home.

Specs and sizes.

Floor Warming specifications
TypeHeating cable on spools
SizesMultiple lengths and wattages, sized to the area
Larger areasSpools can be combined
Cable spacingSpacing strips, or an uncoupling membrane (recommended)
Floor sensorPlaced between the cables
Covered bySelf-leveling concrete or thin-set
Floor coveringsTile, stone, wood and nearly all others

See it installed.

Floor warming cable installationHow the cable is laid out above the subfloor.
Floor warming installation by ThermaRayFloor preparation, laying the cable and placing the remote floor sensor.

Common questions.

Have one that isn't here? Call 800-506-7973.

More answers

All Questions

What flooring can go over electric floor warming?

Nearly all of it: tile, stone, wood and most other coverings. The cable is covered with self-leveling concrete or thin-set first.

Can I heat a bathroom floor in a remodel?

Yes. The cable goes on top of the existing subfloor or slab, so a bathroom remodel is one of the most common places to add it.

How is the cable installed?

The cable is spaced evenly across the floor, usually on an uncoupling membrane. A floor sensor goes between the cables, the leads run back to the thermostat, and the whole floor is covered with self-leveler or thin-set.

Can floor warming heat a whole room?

Yes. Spools come in several lengths and wattages and can be combined, so a system can cover an entire space as primary, supplemental or luxury heat.

Is floor warming 120 or 240 volts?

Either. ThermaRay floor warming cable kits come in 120-volt and 240-volt models, and other voltages are available. Your electrician matches the kit to the circuit in the room.

Get a design for your building.

Tell us about the space and we'll size the system room by room, with drawings and install instructions for you or your electrician.